VLT FC300
采用電熱管加熱方式,將有機熱載體(導熱油)加熱到工藝溫度,并通過高溫油泵進行強制液相循環,將熱能輸送給用熱設備,并且能在較低的工作壓力下獲得較高的工作溫度,熱效率達95%。將電能轉化為熱能傳遞給用熱設備,如此周而復始,實現熱量的連續傳遞,使被加熱物體溫度升高,達到加熱的工藝要求。
導熱油加熱器只承受泵壓,導熱油加熱系統無爆炸危險,因而其更加安全;有機熱載體加熱器的煙氣排放量極少,無排污污染及熱污染,達到環保要求。導熱油熱穩定性能好、傳熱性能佳、低蒸汽壓、以及無毒無味、對設備無腐蝕等許多優點。導熱油加熱器采用日本富士數顯溫控儀控溫,具有超溫報警、低油位報警、超壓力報警功能,是一種高效節能的供熱設備。
1、化工行業 化纖行業 反應罐、蒸溜罐等
2、塑料行業 塑料發炮,擠壓定型
3、紡織行業 定型機、染色機、干燥室、高溫機、滾筒
4、橡膠行業 橡膠的硫化加熱
5、食品行業 蒸煮、干燥、油脂提煉
6、木材行業 夾芯板、保麗板、纖維板的加溫定型
7、造紙行業 包裝紙箱的多層紙板烘干
8、其他行業 電鍍行業的槽體加熱、干燥、醫藥工業蒸溜、濃縮、脫水等。
導熱油爐被越來越多的行業所應用,用途也越來越廣泛,它具有熱損失小,節能效果顯著,環保效果好等優點,被眾多廠家熟知。那么在使用導熱油爐的同時,如何清洗也是至關重要的, 因此了解它的清洗方法很有必要,下面我們以前來了解一下它的清洗步驟。
首先排放舊油:利用供熱系統,將導熱油加熱至70-80℃,趁熱排放系統內所有導熱油,排放完成后,可根據條件,用壓縮空氣吹掃系統內未排盡的殘存導熱油。
第二步是預洗:將清洗專用藥劑按循環總量的1--2%計量溶解后,在供熱系統任一部位投入系統,向系統注滿清水,加熱至60℃±5℃,切換系統中的相關閥門,使系統中的所有部位分別得到清洗。三小時后,打開系統的所有低位排污閥,排放系統中的水。
第三步是清洗:將清洗專用藥劑按循環總量的5-8%計量溶解后,在供熱系統任一部位投入系統,并向系統注滿清水后,加熱清洗藥劑至90℃±5℃。切換系統閥門,使系統內所有部位皆可得到清洗,閥門切換按每小時進行一次為宜。整個清洗時間不少于24小時。
第四步是水洗:不斷的想系統中加滿清水,執行相關操作不斷清洗,此過程一般重復三遍。如果系統較小,可減少清洗步驟,沖洗至水清為止。
第五步是加新油:向系統內注入新導熱油。
第六步是脫水:其脫水方法與新系統使用前的脫水標準等同。
以上就是對導熱油爐清洗步驟的簡單介紹,我司專業生產導熱油爐,歡迎廣大客戶來電咨詢購買。
該設備觸及的專業技術廣,有電阻加熱、感應加熱、電弧加熱、紅外加熱、等離子加熱、微波加熱、電子束加熱等,市場競爭越來越激烈,
導熱油爐是將電加熱器直接插入有機載體(導熱油)中直接加熱,并通過高溫油泵進行液相循環將加熱后的導熱油輸送到用熱設備,再由用熱設備出油口回到電熱油爐加熱,形成一個完整的循環加熱系統。在化學工業中,主要用于蒸餾、蒸發、聚合、縮合/脫乳、脂化、干燥、熔融、脫氫、強制保溫以及農藥、中間體、防老劑、表面活性劑、香料等合成裝置的加熱。
1、我公司產品非標定制,以上產品價格、屬性?xún)H供參考;下單前請告訴我們?cè)敿?xì)的工藝參數,我公司免費提供產品的技術咨詢,免費設計產品方案。
2、受市場價格影響,以上產品價格均為參考價格,詳情請以來電或旺旺咨詢價格為準。
非滿管狀態流動的水路稱作明渠(open channel),測量明渠中水流流量的儀表稱作明渠流量計。明渠流量計應用場所有城市供水引水渠、火電廠冷卻水引水和排水渠、污水治理流入和排放渠、工礦企業廢水排放以及水利工程和農業灌溉用渠道。
我公司生產的STM系列明渠流量計具有同介質非接觸測量,節省場地,工作可靠,量程比寬等優點,既可用于污水排放的測量,又適用于農田水利灌溉的用水計量以及舊城區的排水改造工程。
• 超聲波非接觸式液位測量,完全不影響流速,液位測量準確,是理想的液位儀;
• 探頭功耗低,安裝簡便,易定位,適用條件廣,輸出標準4-20mA電流信號,可單獨做液位儀使用;
• 流量積算儀操作簡便,適用量水堰槽類型寬,包括薄壁直角三角堰,矩形堰,巴歇爾槽等;;
• 流量積算儀控制功能全面,兩路繼電器信號輸出,易連接常用執行機構(電動機,報警器等);
• 探頭可選防腐,防爆,小盲區,超低功耗,大量程等特殊型號產品;
• 本產品可配備U盤、微型打印機及后備蓄電池,方便用戶采集保存數據或者;
• 可選內置8只AA電池,停電可正常工作數小時;
2. 明渠流量計基本原理當被測介質全部通過巴歇爾槽形成自由流時,其流量與巴歇爾槽上游水位的關系為Q=C×Hn 式中C、n為節流系數,H是上游水位高度,通過測量水位的高度再進行一系列換算就可以得出相應的瞬時流量。
3. 流量計主要技術指標STM明渠流量計積算儀是一款通用工業智能儀表,具有工業通用4-20mA,0-20mA,1-5V,0-5V等線性信號輸入方式,及RS485串口輸入功能(可選)。本儀表集成兩路信號輸入控制模塊,可同時分別控制每路信號,也可以對兩路做相關運算,并顯示和輸出結果。配合本公司的超聲波液位計使用,可組成液位差控制系統。本儀表集成明渠流量積算儀功能,可作為明渠流量計使用。創新數據源設計,使應用更具靈活性。
產品特色 | 技術參數 |
●內置8只AA電池 ●四路信號輸入(模擬+數字可以同時輸入) ●兩路4-20mA電流信號變送輸出 ●明渠流量計功能 ●復合數學運算功能(液位差) ●RS485通信接口(支持Modbus協議) ●U盤一鍵下載 ●雙通道繼電器輸出 ●DC12V 5W電源輸出(可選24V) ●微型打印機接口(可選)
| 量程:用戶自己設置 顯示精度:視輸入信號而定 標定:出廠標定,可現場校準 顯示:2.8英寸LCD按鍵:4位輕觸鍵 信號輸入:4~20mA;0~20mA;1~5V; 0~5V;RS485; 輸出 電壓輸出:DC 12V或24V 信號輸出:RS485;2 通道繼電器 繼電器觸點容量:AC:5A 250V DC:10A 120V 供電 工作電壓:AC160V~250V 正常功耗:<5W 外形尺寸:2200×185×110mm
|
瑞士HUBA511壓力變送器的詳細介紹
瑞士HUBA511壓力變送器 511系列壓力變送器采用新穎獨特的陶瓷技術,可精確測量、放大壓力信號,并將其轉換成標準的電流或電壓信號。多種壓力和電氣連接可供選擇?捎迷跈C(jī)械,暖通等行
聯系人:徐小姐 QQ: 2319696623
瑞士HUBA壓力變送器511電子力學 量 程: —0.1 ~ 60 MPa 精 度: 線性度、遲滯性、重復性之和 < ± 0.3%倍滿量程;響應時間: < 2ms;技術參數壓力范圍 :(單位:MPa) -0.1~0 0~0.1 0~0.16 0~0.25 0~0.4 0~0.6 0~1 0~1.6 0~2.5 0~4 0~6 0~10 0~16 0~25 0~40 0~60 過載壓力 :2~3倍滿量程;破壞壓力 :2~3倍滿量程;壓力連接 :內螺紋G1/4 (O型圈密封);外螺紋G1/4 后部密封(DIN3852/E);外螺紋R1/4; 外螺紋M12x1.5; 外螺紋M14x1.5; 輸出/電源:0-5V/8-33VDC(3線);1-6V/8-33VDC(3線) 0-10V/11.4-33VDC(3線); 0-10V/24VAC± 15%(3線);4-20mA/8-33VDC(2線); 0.5-4.5V/ ratiometric 5VDC (4.575-5.25) 電氣連接 :電纜1.5米 (防護等級IP67),插裝式連接,AMP連接盒,M12X1 連接盒,工作溫度 :-15°C ~125°C / -25°C ~85°C / -40°C ~150°C;接觸介質材料 :不銹鋼;密封材料 :氟橡膠(FPM)、丁氰橡膠(NBR)、特殊氟橡膠(FPM) 殼體材料 :不銹鋼;負載頻率 :< 50Hz 重 量 :內螺紋85g,外螺紋95g;外形尺寸 :?22.8×77mm;
壓力傳感器 | ||||||||
| ||||||||
類型 | 特點 | 選項 | 功能 | 型號# |
|
| ||
511系列 | 簡潔的511系列壓力變送器滿足高規格的機械壓力需求,良好的電磁兼容性,操作。這個范圍特別適合于所有高要求的工業應用 相對壓力 -1~600 bar 絕對壓力 0~25 bar |
|
|
|
|
| ||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
604系列 | 604系列在通風管道中被用作空氣壓差開關來控制過濾器和風扇,此外還應用于風門的主次級控制系統中。 也非常適合防止加熱線圈過熱和監控工業空氣制冷電路 0.2~50 mbar |
|
|
|
|
| ||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
501系列 | 501壓力傳感器利用陶瓷技術,測量得出校準的和放大的信號,并將其轉換為標準的電流或電壓輸出 相對壓力 0~16 bar |
|
|
|
|
| ||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
692系列 | 692系列壓差變送器利用獨特的陶瓷技術測量出校準、放大的傳感信號,并將其轉換為標準的 或電流輸出。 多種特定應用,壓力、電氣連接和構件材料 0~25 bar |
|
|
|
|
| ||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
694系列 | 694系列壓差變送器結合的陶瓷技術測量校準的、溫度補償?shù)膫鞲行盘?hào),并將其轉換為標準的電壓或電流輸出。 非常適合于空調系統中的低壓氣流和測量環境、實驗室、潔凈室中的凈壓(空氣或無腐蝕性氣體) -0.5~50 mbar |
|
|
|
|
| ||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
| |||||
506系列 | 506系列壓力變送器使用的陶瓷技術測量出校準的和放大的傳感信號,并輸出標準的電流或電壓信號。 特殊為工業制冷行業設計制作 -1~60 bar |
|
|
|
|
| ||
|
|
|
|
![]() |
全中文數字鍵全站儀GTS-330N系列 |
GTS-330N系列全站儀機身小、畫面大、全中文顯示,帶有數字/字符鍵,最適合一線作業的需求。特點:* 的距離和角度測量功能* 測角精度:±2”/5”,絕對法測角,無需過零檢驗。* 測距精度:±(2mm+2ppm*D)* 測程:3km/一塊棱鏡。 高速測距:精測1.2秒 粗測0.7秒 跟蹤0.4秒* 帶有數字/字符鍵,野外輸入更方便。* 裝有雙軸補償器,可提供電子氣泡用于整平,并可自動改正由于整平誤差對水平角和豎直角觀測的影響。 * 充足的內存空間供數據存儲用,可存儲24000個觀測點24000個坐標點。* 特別耐用,防塵等級達IP66級 。* 結構緊湊,重量輕(主機含電池僅4.9KG),攜帶方便。 * 裝有應用測量程序,可做偏心測量、對邊測量、后方交會以及面積測算等項目 。* 裝備電池(BT-52QA),作業時間達10小時 。* 操作面板簡單,屏幕顯示全中文化,易學易用。 |
電纜掛牌32*68單孔,30*60雙孔,光銀拉絲銘牌
電纜掛牌32*68單孔,30*60雙孔,光銀拉絲銘牌
我公司《朱星俞 15818777527 》專營各款式:線號機
,線號印字機,標牌機,線號印字機,線號機色帶(TM- 11B,LM-IR300B);國產線號機色帶(CH-11B
、CH-300B), 佳能線號機色帶,麗標線號機色帶。碩方線號機色帶,TP-R100B,標映線號機色帶,RS-
80B.中英文線號機,線號機,線號機,打號機,線號管印字機,標映線號機,佳能線號機,MAX線號機,
碩方線號機。 LM-380A、LM-370E、LM-370A、M-11C、C-100T、C-200T、(TM-45C/TM-
45E),TP60A、TP66A、深圳線號機,深圳打號機,佳能線纜標牌印字機:PP-1080RE、M-300標牌機、C-
450P標牌機,PP- RC3BKF色帶, M-300專用色帶:PP-RC3BKF 黑色、PP-RC3RDF 紅色、 PP-RC3BLF 藍色,
佳能標牌機,碩方標牌機,線纜掛牌機,電纜標牌機,碩方線纜標牌印字機,SP500標牌機, SP-R150B色
帶。兄弟標簽打印機:PT-1280、PT-1650、PT-18R、PT-2700、兄弟標簽機、brother標簽機等系列產品
及其相關材料(色帶、套管、標簽、貼紙、標牌、電纜掛牌等)。線號機,打號機,價簽機,條碼機,標
簽機,不干膠標簽 《深圳市鴻標貿易有限公司:朱星俞 15818777527 若有問題,
ZO-302氧化鋯氧量分析儀(恒溫式)由分析儀和煙道氧傳感器兩個部分組成。它不需要采樣設備和其他輔助設備。煙道氧傳感器 |
直接插入爐膛或煙道內,能快速準確的反映爐內燃燒時的即時氧含量,并輸出與氧含量成正比的電信號。分析儀是一臺以單片微處理 |
器為核心組成的智能化儀表,通過軟件實現大部分功能,如參數的修改、上下限報警設定、標準氣在線校準、實時數據傳輸?shù)龋褂?/td> |
及維護十分方便。 |
本儀表適用于各種鍋爐、窯爐及石油化工發電廠等需要用煤、油等物質加熱、燃燒的爐膛及煙道中的氧含量的測量,如與自控裝 |
置的配套,可即時有效的控制煙道擋板、油門、風門等,對提高燃燒效率、節約能源、減少污染有顯著的作用。 |
UCS30-PC伽瑪能譜儀
詳情介紹
美國SPECTECH公司UCS30-PC伽瑪能譜儀為能譜實驗設計的多選擇的操作系統。
UCS30-PC 系統用于普通的電腦的能譜儀,可運行在2000/XP系統下。外置單元通過USB接口接電腦,1024道MCA和前置放大器,電腦控制放大器,高壓(0-2048V),上平和下平鑒別器和多道測量可做半衰和衰變的學習研究。也包括一個前置放大器輸出(±12 V) 連接探測器用外置的前置放大器,相匹配的計數器和CdZnTe探頭。
UCS30-PC伽瑪能譜儀完整的系統包括:NaI(Tl)閃爍體探頭的鉛室和多階樣品架,8片放射性同位素源,MCA軟件有峰識別和實驗說明書CD。
UCS30 USB Computer Spectrometer
Designed as a direct replacement for the popular model UCS20, the UCS30 nuclear spectrometer offers many enhancements and additional features for increased flexibility. USB connectivity provides plug and play operation with most of computers running Windows 2000 or XP. Three models are available with 1024, 2048 and 4096 channels of conversion gain.
The internal preamplifier allows direct connection to scintillation detectors. The bipolar amplifier includes polarity selection and multiple shaping times when using different types of detectors with external preamplifiers. Upper and lower level discriminators may be set for rejection of unwanted signals. The high voltage supply is rated to +2048V for use with scintillation or proportional detectors. Optional polarity selection is available for use with detectors requiring negative bias. A preamplifier power connector (±12V) is included for use with our model PA-1 external preamplifier. A 10µsec fixed conversion ADC allows high throughput with deadtime correction. Input selection for preamplifier, amplifier or ADC direct is included by computer control.
In addition to the normal pulse height analysis mode the UCS30 may be operated as a Multichannel Scaler for time correlated studies such as half-life decay. A special Mossbauer mode is included with MSB output for synchronization of the drive circuit. X-ray mapping may be performed with the optional ROI output.
For ease of setup an auto-calibrate mode is provided that automatically sets the HV and amplifier gain to 1 keV/ channel using a Cs-137 source. Once the system is calibrated all parameters may be saved as setup files for quick recall of specific measurements. Data may be saved as binary files for reloading into memory or as spreadsheet compatible files for data processing.
A background buffer is included for storing a spectrum when background subtraction, factional spectrum stripping or overlay is required. Multiple ROIs may be set with calculation of gross and net area. Presets include Real Time, Live Time and ROI Integral.
Isomatch includes a text editable library of common isotopes. When loaded, markers are placed on the display at the positions of the isotope energies to aid in identification.
Multiple UCS30s may be connected to a single computer providing USB ports are available. The internal power supply is UL, CE and CSA listed for operation worldwide. Warranty is one year parts and labor, return to factory.
Specifications:Hardware.
· Physical: Bench top enclosure with USB 2.0 interface includes preamplifier, amplifier, detector high voltage, up to 4096-channels depending on model, Multichannel Analyzer with data memory, LLD and ULD. Pulse height analysis and Multichannel Scaling modes. Fully compatible with many scintillation detectors and commercial tube bases.
· Data Input: BNC connector multi-function input. On-board relays select internal preamplifier, shaping amplifier or direct to ADC when using external signal processing.
· Gate Input: BNC connector. Normally open gate. TTL low closes gate to ADC.
· HV Output: MHV connectors. Positive output, (switched positive or negative outputs with HV option). (SHV connectors optional), 0-2048 volts, 1mA maximum current at 1000 volts. High voltage is fully regulated and computer controlled in 2 volt increments.
· MCS Input: BNC connector bypasses internal preamp/amplifier. Accepts positive TTL signal >150nsec., 5MHz maximum rate.
· ROI Output: BNC connector. Generates pulse each time an event occurs in set region of interest. Requires ROI option.
· MSB Output: BNC connector. TTL output of dwell counter most-significant-bit for synchronizing Mossbauer drive.
· USB: USB type “A” connector. USB 2.0 standard.
· Preamplifier: Charge sensitive preamplifier for use with scintillation detectors and PMTs.
· Amplifier: Bipolar shaping amplifier with selectable peaking times of 1, 2, 4 and 8µsec. Computer controlled coarse and fine gain from x1 to x160. Input polarity selection.
· External Preamp Power: DB-9F connector supplies ±12 volts.
· ADC: Fixed conversion 10usec. Computer selected conversion gain from 256 to 4096 channels depending on model. Direct input accepts pulse peaking times of 0.5µsec. to 10µsec. Includes dead-time correction when used in Live-time mode.
· LLD & ULD: Independently computer controlled discriminators over entire input range. Operates prior to ADC for reduced system dead time.
· Modes: MCA for pulse height analysis, MCS for half-life decay or other time related studies and Mossbauer mode.
· Timers: Real-time or Live-time operation selectable in 1-second increments for PHA, or dwell times from 10msec. to 60sec. per channel in MCS mode. In Mossbauer mode, 100usec. to 500usec.
· Data Memory: On-board dynamic RAM, up to 4096 channels x 3 Bytes for data, plus region-of-interest flag.
· Deadtime: System dead time is computed and displayed on screen during acquisition.
· Power: AC line, 100-250VAC, 50/60Hz, auto-sensing internal power supply with Universal Power Cord input.
Software.
· System: Operates under Windows 2000/XP.
· Display: Color or monochrome monitor, Vertical scale adjusts from 32 to 16M and LOG display. Horizontal 4096 channels depending on model with expansion down to 128 channels.
· Time Mode: Preset live-time or preset real-time selection. Both times are recorded and displayed.
· Count Mode: Preset count mode integral of region-of-Interest.
· ROIs: Multiple Regions-of Interest using color coding.
· Integral: When cursor is in ROI, computes gross area, net area with end point averaging, centroid and FWHM.
· Energy Cal: 2-point linear or 3-point quadratic converts cursor position reading directly to energy units. (Time units in MCS mode.)
· Autocalibrate: Use with Cs-137 source to automatically calibrate system for 1 keV/channel.
· Bkgd Buffer: Used to store background spectrum for time normalized background subtraction.
· Subtract: Subtracts channel-by-channel time normalized data stored in Background Buffer from display data.
· Smooth: 3-point smoothing of displayed data. Does not modify data in acquisition memory.
· Control: Software control of Input Selector, High Voltage and Polarity (with HV option), Amplifier Input Polarity, Peaking Time, Gain, Lower and Upper level discriminators, and ADC Conversion Gain.
· File: Save or load data file and header information in binary format or as CSV/TSV files. Save or load setup files for specific configurations.
· Clipboard: Clips data and header information, graphic screens, ROI data containing, centroid, FWHM, gross and net integrals, and header information in spreadsheet compatible format for transferring into other applications.
· ISOMATCH: Isotope library text file with peak markers and labeling for overlaying on spectrum. Provides quick isotope identification. Libraries may be edited and extended using word processors or text editor programs.
Ordering Information.
UCS301K Universal Computer Spectrometer 1024 channel for Windows 2000/XP
UCS302K Universal Computer Spectrometer 2048 channel for Windows 2000/XP
UCS304K Universal Computer Spectrometer 4096 channel for Windows 2000/XP
UCS30-HV Positive or negative high voltage option
UCS30-ROI Region of Interest pulse output option
Accessories
LS325 Environmental lead shield for 2" or 3" detectors.
SD51 2x2 in. NaI(Tl) with integral photomultiplier.
TS51-2 Tube base stand, 14-pin for 2" or 3" detectors, complete with cables.
PA1 External preamplifier for proportional counters.
SP78W-2 Well detector complete with stand, LS2000 lead shield and cables.
SPA38 Complete detector assembly with 38x38mm detector, stand, LS038 shield and cables.
Spectrum files can be transferred from the ICS 10 DOS program and the ICSW 16 Windows program to the UCS-30 Windows version.
Most functions may be accessed by more than one method. All the functions can be accessed from the Pull Down Menu, some from the Tool Bar Buttons, or by the mouse. If the function has a Tool Bar Button, its symbol will be shown on the left hand side of the description.